BlockPackages

Machined Block Package 1- Sunnen Mandrel hone block with plateau brush finish, tig weld lifter bore area for strength. cleaned and ready to assemble. Comes without the side cover. Add other parts if you need to. Total $225

Machined Block Package 2- Sunnen Mandrel hone block with plateau brush finish, tig weld lifter bore area for strength. cleaned and ready to assemble. Comes with side cover. Add other parts if you need to. Total $275

Machined Block Package 3- Blocks are "pre-stressed" and stress relieved using a confidential process. Tig weld lifter bore area for strength. Align bored stock block 90 degree to crank pin centerline. Sunnen Mandrel hone block with plateau brush finish cleaned and ready to assemble. Custom Gecker Motorsports Seats and valve guides and lifter bore guides installed. Deck top of block to proper pop out rules (WKA/IKF) and deck bottom of the block parallel to crank pin centerline. You cut the seats/supply parts. Comes with spec sheets. Total $445

Machined Block Package 4- Blocks are "pre-stressed" and stress relieved using a confidential process. Tig weld lifter bore area for strength. Align bored stock block 90 degree to crank pin centerline. Sunnen Mandrel hone block with plateau brush finish cleaned and ready to assemble. Custom Gecker Motorsports Seats and valve guides and lifter bore guides installed. High-End Cut seats using a proprietary sone cutting system and valves lapped using a special compound made for us. Comes with the blueprinted valves and spring pockets cut and set for the perfect pressure per the cam you will run. Deck top of block to proper pop out rules (WKA/IKF) and deck bottom of the block parallel to crank pin centerline. Comes with spec sheets. Total $580 Parts Included In Engine Package 4: Dual Bearing Raptor Block, Side Cover, Wrist Pin & Blueprinted ARC Connecting Rod, Intake and Exhaust Valves, Custom Gecker Motorsports Valve Seats and Valve Guides, Blueprinted Valves and Blueprinted Piston.

Machined Block Package 5- Same machining as Block Package 4 but comes with additional for you to complete a short block. This allows you to use your existing parts and build the rest of your engine. You port this block. Total $720 Parts Included In Engine Package 5: Dual Bearing Raptor Block, Blueprinted Crankshaft, Side Cover, Intake and Exhaust Valves, Wrist Pin & Blueprinted ARC Connecting Rod, Blueprinted Valves, Custom Gecker Motorsports Valve Seats and Valve Guides, Blueprinted Piston & Wrist Pin and Blueprinted Custom Made Piston Rings fitted to the bore.

Machined Block Package 6- Same as 5, but we port the block both intake and exhaust. We will also ship you a matching head! So you have all the parts for a short block, just add the rest of your parts and you have a complete engine! Comes with spec sheets. Total $795 Parts Included In Engine Package 6: Dual Bearing Raptor Block, Blueprinted Crankshaft, Side Cover, Wrist Pin & Blueprinted ARC Connecting Rod, Blueprinted Valves, Custom Gecker Motorsports Valve Seats and Valve Guides, Blueprinted Piston & Wrist Pin, Blueprinted Custom Made Piston Rings fitted to the bore.

Machined Engine Kit 7- This is a complete engine. We get the kit engine from Briggs and start machining! Everything you need to hit the race track after two hours of assembly. All the machine work is done for you. This is the same engine kit as number 5 with the extra parts. Total $1005 Parts Included In Kit Engine 7: All hardware, all shields etc, Flywheel, Crankshaft, Side cover, Wrist Pin & Blueprinted ARC Connecting Rod, Custom Blueprinted Head, Blueprinted Intake and Exhaust Valves

Common Options For Engine Kits:

-Ceramic Bearings $164 per set -Add porting $35.00 -Add Header $29.00 -Add muffler $31.00 -Add header brace hardware (complete mounting and hardware kit) $20.00 -Add Loop Pipe $64